Single centrifuge

CT100A

Solid liquid compact separation system for glass grinding sludge. The system is composed of painted iron frame structure that includes all the components and a centrifuge type T-150/A automatic discharge. This automatic system is a mechanic solid liquid separator for the purification of the processing refrigerator fluid that remove all solids particles contained in the liquid up to 3 microns mm. the dirty fluid is be pumped into the centrifuge. There the solids injected as laminar into the centre of the bows will be press and settle on the bowl wall. Entering on the programmable display the cycle time for each operation sets the operating sequence. At regular intervals, the injection of fluid and rotation is stopped. The sludge expulsion gear motor engages with the gears to make the bowl remove the deposit particles almost dry. The sludge will be discharged true the bottom door that open automatically and drops the waste into a big bag container located under the machine.

When cleaning of bowls is completed, the fluid will be injected again and the purification will restart.

The space required for this system is about sm 1,5.

CT6M+iCLEAN

Manual unload Centrifuge type TORNADO CT6M+iCLEAN for the purification and recycling of 100 per cent of coolants from glass and stone grinding by removal of solid particles contained in the fluid to purify. The dirty fluid is injected into the rotor bowls by means of a pump. Here the “G force” pushes the suspended particles, contained in the fluid with different density, onto the bowl wall, causing the purified fluid to flow out. At present time, an acoustic alarm warns the operator to carry out the manual unload of sediment particles. He has to arrest the centrifuge by push the stop button, when the safety lock is released, lift centrifuge cover up, remove the sludge holder, replace it after been clean, lower the cover and run cycle again, by push the START button. The floor space require for this system is less than sm 1.

CT6iCLEAN

Manual unload Centrifuge type TORNADO CT6 iCLEAN for the purification and recycling of 100 per cent of coolants from glass and stone grinding by removal of solid particles contained in the fluid to purify. The dirty fluid is injected into the rotor bowls of the centrifuge by means of a pump. Here the “G force” pushes the suspended particles, contained in the fluid with different density, onto the bowl wall, allowing the purified fluid to flow out. At present time, an acoustic alarm warns the operator to carry out the manual unload of sediment particles. He has to arrest the centrifuge by push the stop button, when the safety lock is released, lift centrifuge cover up, remove the sludge holder, replace it after been clean, lower the cover and run cycle again, by push the start button. The floor space require for this system is less than sm 1.

Syndicate content